FEATURE & SPECIFICATION

SPECIFICATIONS :-
Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.

TYPES :-
We offer three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below given the short description about all types we offer:

• Type A2: recirculate approximately 70% air and 30% exhaust
• Type B1: recirculate approximately 30% air and 70% exhaust
• Type B2: Does not recirculate but exhaust 100% air

CONSTRUCTION :-
Our cabinets are ergonomically designed to provide long service life. Only thick metal sheets and ipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today.
There are three different MOC used.

• Complete Stainless Steel 304 / 316
• Inner Stainless Steel, Outer Mild Steel
• Stainless Steel bench, rest mild Steel

AIR CIRCULATION OF CLASS II B2 :-

The Class II B2 cabinets are the total exhaust cabinets used in toxicology laboratories and similar applications where chemical efficiency is present and clean air is essential.

There is no recirculation within the cabinet. Room air enters through a blower on the top of the cabinet and passes through a ULPA supply filter into the work area as the vertical unidirectional airflow.

Descending air is pulled within the base of the cabinet through the perforated front and rear grill and exhausted immediately. 100% of air is pulled into the facility exhaust system for appropriate treatment.

Type B2 cabinets must be hard connected to an exhaust system and vented outside the building without recirculation.

STANDARD ACCESSORIES :-
Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UV lamps are fitted inside working zone in such a way that the operator cannot see them directly. Microprocessor controlled mechanism allows UV on only when door is closed. Auto sensors facilitate to run blower after opening of door only. User can set warm time as per convenience which in turn will turn on the FL light only after set time and door open controlled by microprocessor. Electrical sockets are fitted to run any instrument under the working area; in addition, service fixtures for air, gas, vacuum and water are fitted on demand.

We also manufacturer biosafety cabinets class 2 type A2

MICROPROCESSOR BASED PID CONTROLLER :-

• Automatic control of UV, Blower and LED light on sash movement.
• Large LCD Display with clear vision.
• External Socket control to avoid hand touch inside the chamber.
• Warm up timer option allows delay in switching on LED to clear internal air before working on opening of Sash to safe level

TECHNICAL SPECIFICATIONS :-

STANDARD SIZE/ DIMENSION :-